# Migration table ok, but no balance in new wallet

**URL:** <https://forum.safex.org/t/migration-table-ok-but-no-balance-in-new-wallet/6665>\
**Category:** Support\
**Created:** [November 27, 2019, 11:03am UTC](https://forum.safex.org/t/migration-table-ok-but-no-balance-in-new-wallet/6665 "2019-11-27T11:03:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![radegeddon](https://forum.safex.org/letter_avatar_proxy/v4/letter/r/71c47a/32.png) [@radegeddon](https://forum.safex.org/u/radegeddon)\
**Post date:** [November 27, 2019, 11:03am UTC](https://forum.safex.org/t/migration-table-ok-but-no-balance-in-new-wallet/6665/1 "2019-11-27T11:03:13Z")

</div>

Hi,  
on 25.11. I’ve done the migration from OmniWallet (address: 17E4f2RVn8BgZvvDdf324SkT7mf7W1xTwZ), the migration table was populated, but no balance changes on new address (imported private keys into Oribter wallet, address: Safex61BuDuPEoSNcgBsYMEzzH1ggdFMF2nfCs1ME8xcauSEtqkbyL5QhWPNbC2GndRTxZYgp2GHh86uW4QS2T41XLodTkNm5wQ4v).  
I’ve checked on the explorer, the first two steps are done in enough time apart, i.e. in two different blocks (block height: 605395 and 605397). The final step was done after ~40 min.  
Has the migration script been running in the last two days? Or have I done something wrong?  
Thank you for the support.

---

<div class="post-metadata">

**Author:** ![aussiesloth](https://forum.safex.org/user_avatar/forum.safex.org/aussiesloth/32/2080_2.png) [@aussiesloth](https://forum.safex.org/u/aussiesloth)\
**Post date:** [November 27, 2019, 11:11am UTC](https://forum.safex.org/t/migration-table-ok-but-no-balance-in-new-wallet/6665/2 "2019-11-27T11:11:05Z")

</div>

Your migration transactions look fine… allow 4 hours for the Migration Table to populate.

Dan is scheduled to run his Migration Script against outstanding burns on a daily basis for the remainder of the month, so your coins should appear in Orbiter within 24 hrs (but he may miss a day, so don’t panic if that’s the case.)