# Safex Node Questions

**URL:** <https://forum.safex.org/t/safex-node-questions/7858>\
**Category:** Support\
**Created:** [June 29, 2021, 6:07am UTC](https://forum.safex.org/t/safex-node-questions/7858 "2021-06-29T06:07:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pooi](https://forum.safex.org/user_avatar/forum.safex.org/pooi/32/3188_2.png) [@pooi](https://forum.safex.org/u/pooi)\
**Post date:** [June 29, 2021, 6:07am UTC](https://forum.safex.org/t/safex-node-questions/7858/1 "2021-06-29T06:07:40Z")

</div>

Hi Guys,

I am running a safex node, When i check the “status”, there are 0 ins, and 8 outs. I left this there for a few days and it still can’t get any INs, any idea?

I am running on windows 10. Also i did the following troubleshooting already

1. Safexd running as admin
2. firewall whitelisted
3. Antivirus exempted.
4. on my router level there is no firewall. its a normal home router

Does anyone have any idea where i should check next?

---

<div class="post-metadata">

**Author:** ![aussiesloth](https://forum.safex.org/user_avatar/forum.safex.org/aussiesloth/32/2080_2.png) [@aussiesloth](https://forum.safex.org/u/aussiesloth)\
**Post date:** [June 29, 2021, 6:26am UTC](https://forum.safex.org/t/safex-node-questions/7858/2 "2021-06-29T06:26:38Z")

</div>

See Edit 3 in OP of this thread… [Tutorial: Set up a Safex node on Vultr](https://forum.safex.org/t/tutorial-set-up-a-safex-node-on-vultr/6932)

---

<div class="post-metadata">

**Author:** ![pooi](https://forum.safex.org/user_avatar/forum.safex.org/pooi/32/3188_2.png) [@pooi](https://forum.safex.org/u/pooi)\
**Post date:** [June 29, 2021, 7:22am UTC](https://forum.safex.org/t/safex-node-questions/7858/3 "2021-06-29T07:22:58Z")

</div>

thanks @aussiesloth , with the tip from lomax about the port in edit 3.

i enable a NAT port forwarding on my router to the PC running it. So its working good now

I see a few INs already